IRP BRP Extended Rear Wheel Adapter Hubs (No washers)

IRP Rear Hub Adapters for the BRP Tires. These are the extended rear hub adapters for your HPI Baja that allow the use the World Famous BRP (Bishop Racing Products) 1/4 scale tires and wheels. These adapters are machined out of T-6061 aluminum and are sold as a pair. (2 hubs). The rear hubs are pre-drilled for the stock 4mm pin and the 5mm pin. They also have an Oil and Chemical Resistant O-ring that is designed as an additional safety backup to keep your stub axle pins in place They come pre-assembled with hardened wheel studs and stainless nyloc nuts . These have been Thoroughly Tested for over 18 months in Severe bashing, they have also been tested and proven on concrete , asphalt , and dirt Oval , and they have also gone over 100 mph in High Speed Runs with Zero failure . **** Special Note On The Rears **** The rears Will fit the Losi 5ive with Zero modifications , you will need to purchase 2 sets of them since the Losi has stub axles on all 4 corners. We are currently testing them to find the correct offset needed on the wheels from BRP, we will have more info very soon on this, and BRP will have a Losi Specific offset wheel in the very near future. <<< You Must contact IRP or BRP direct Before purchasing the Tires and Wheels to ensure you get the proper combination >>>

IRP no longer includes the back spacing plates or the compression outer washer. These are available separately