About
About
78mm vented clutch bell for Zenoah G43L and CY GP420 / GP460 engines.
Machined in the USA of high grade 12L14 steel.
This new v2 clutch bell has a thicker sidewall (2mm thick)
Works with go-ped front sprockets - 8mm x 1.25 metric thread size.
This is the clutch bell upgrade everyone has been waiting for.
This is an upgrade that goes in place of stock PMW part # 121130002
Please note: ** If using an old (original style) housing on the GSR40 model only, the bell may slightly rub on the inner part of the housing. Depending on the casting, it may or may not. If it does, the inner part of the housing may be milled with a dremel or similar tool to give the needed clearance, or an aftermarket housing may be used (we offer the toymaker, part GT840 or GT840BK)
Machined in the USA of high grade 12L14 steel.
This new v2 clutch bell has a thicker sidewall (2mm thick)
Works with go-ped front sprockets - 8mm x 1.25 metric thread size.
This is the clutch bell upgrade everyone has been waiting for.
This is an upgrade that goes in place of stock PMW part # 121130002
Please note: ** If using an old (original style) housing on the GSR40 model only, the bell may slightly rub on the inner part of the housing. Depending on the casting, it may or may not. If it does, the inner part of the housing may be milled with a dremel or similar tool to give the needed clearance, or an aftermarket housing may be used (we offer the toymaker, part GT840 or GT840BK)